Product recommendations
Product Description
The AZ-Delivery BME280 is one of the latest humidity, pressure and temperature sensors with a digital I2C interface. On the breakout there is a voltage regulator and a level converter for the I2C interface besides the original chip.

Particularities
- Whether for supporting altitude determination for GPS, in model making or as a weather station, the application is particularly convenient due to a universal interface and widespread libraries for Raspberry & Co.
- The sensors have already been calibrated at the factory. The specifications regarding pressure and temperature measurement are identical to the BMP280.
- With high resolution and low power consumption, these sensor modules are ideal for all Makers.
Technical specifications
Operating voltage area | From 3.3V to 5V DC |
Power consumption | <1MA |
Temperature range | from -40 ° C to 85 ° C |
Temperature accuracy | ± 1.0 ° C |
Pressure area | from 300 to 1100 hpa |
Accuracy | ± 1hPa |
Humidity area | From 0 to 100% RH |
Accuracy of the moisture | ±3% |
Dimensions | 9 x 11 x 2mm |

Microcontroller compatibility
Thanks to the fixed voltage regulator and logic level converter "On Board", this sensor works excellently with all microcontrollers.

Quick start guide
When buying one of our high-quality products, you will also receive an inclusive e-book for a quick introduction to the world of microelectronics.
Wichtige Downloads & Links
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Our bestsellers






Featured project proposal
Sensoren durch Verwendung von ESP-NOW über sehr lange Zeit mit Batterie versorgen
in Temperatur-, Luftfeuchtigkeit- und Luftdruck-Sensor sollte mit Batterie betrieben werden und alle fünf Minuten seine Messwerte über WLAN senden. Die Daten sollen dann über eine Webseite abgerufen werden können. Konzept Um diese Aufgabenstellung zu lösen ist es notwendig, den Energiebedarf des Sensors möglichst klein zu halten und es wird ein Webserver benötigt, der die Daten sammelt und bei Bedarf als HTML-Dokument liefert. Als Controller für den Sensor sollte ein D1-Mini mit ESP 8266 und als Sensor ein BME280 verwendet werden. Durch entsprechende Änderungen im Sketch kann auch ein beliebiger Anderer Sensor verwendet werden. In der Pause zwischen den Messungen soll der Controller in den Tiefschlaf-Modus versetzt werden, um den Stromverbrauch zu mindern.
Weitere Projektvorschläge
Projekt Smart Swimmingpool - Einleitung
Wir freuen uns sehr heute das Projekt eines Community Mitglieds vorstellen zu dürfen. Herr Strittmatter hat ein sehr schönes Projekt mit einer Poolsteuerung realisiert, und das ...
RGB Laufschrift mit U-64 Panel
Nach heutigen Maßstäben muss aber alles im Computer RGB sein. Deswegen versuchen wir heute in unserem Blog-Beitrag eine ähnliche Laufschrift mit unseren U-64-LED-Panels zu reali...
More recommended products


Books



